Preguntas frecuentes

Agua y aguas residuales

1. ¿Qué es la contaminación del agua?

   El término contaminación del agua, en general puede definirse como cualquier alteración en
   físico,
   propiedades químicas o biológicas del agua por vertido de aguas residuales o residuos industriales o de cualquier líquido,
   gaseoso o
   sustancias sólidas en el agua que puedan o puedan crear molestias o hacer que dicha agua sea nociva o nociva
   a
   salud pública o seguridad, o para usos domésticos, comerciales, industriales, agrícolas u otros usos legítimos, o
   animal
   vida
   y salud.

2. ¿Cuáles son los principales contaminantes del agua?

   La gran cantidad de contaminantes del agua se pueden clasificar en términos generales en las siguientes categorías:

   1. Contaminantes inorgánicos
   2. Contaminantes orgánicos
   3. Contaminantes térmicos
   4. Contaminantes radiactivos
   5. Sedimentos
   6. Agentes infecciosas
   7. Nutrientes vegetales

1. Contaminantes inorgánicos
   

   Los contaminantes químicos inorgánicos se encuentran naturalmente en el medio ambiente, pero debido a la acción humanadevelopment
   estas
   contaminantes
   son
   a menudo se concentra y se libera al medio ambiente. Los principales contaminantes inorgánicos de interés soncadmium,
   cobre,

2. plomo, zinc, nitrógeno, nitrato, nitrito, amoníaco, fósforo y fosfato.

   Fuentes:

   Los efluentes industriales son la principal fuente de contaminantes inorgánicos. P.ej. dióxido de azufre del poderplants,
   Amoníaco
   de residuos del procesamiento de alimentos y residuos químicos de subproductos industriales. Fertilizantes agrícolas ysurface
   escorrentías
   son otras fuentes de contaminantes inorgánicos.

   Efectos dañinos

   • Puede matar a los peces y otros animales acuáticos.
   • Interfieren con la idoneidad del agua para beber y uso industrial.
   • Toxic pollutants tend concentrate in food chainLos contaminantes tóxicos tienden a concentrarse en las cadenas alimentarias
   • Degradar la actividad microbiana del suelo.
   • Pérdida de la capacidad de vigilancia.
   • Pérdida de coordinación mano-ojo.
   • El gas NO2 puede provocar tos, dificultad para respirar, irritación de las vías respiratorias superiores, broncoespasmos,náuseas
     y vómitos
3. Contaminantes orgánicos
   

   Los contaminantes orgánicos son básicamente compuestos que pueden ser degradados por microorganismos. Suele consumir el

4. disponible
   oxígeno en el proceso de degradación. El OD óptimo en agua natural es de 4 a 6 ppm y, por lo tanto, orgánica.

5. contaminantes
   like
   Se deben eliminar aguas residuales, aceites, etc. para mantener el agua libre de dichos contaminantes.

6. Contaminantes térmicos
   

   El agua calentada se vierte como efluente industrial. Para mantener el equilibrio ecológico de temperatura.

7. necesita serequalized with the receiving water body. This is an important criterion as increased temperature lowers
   dissolved DO in
   water.

8. Radioactive pollutants
   

   Uranium and thorium wastes from mining, refining and its various industrial applications contribute to
   radioactive
   wastes. Nuclear power plants, medical and scientific research use are areas where such wastes may be
   created.

9. Sediments
   

   Erosion removes soil and minerals from crop lands, forests, residential and corporate communities and
   carries
   it as
   sediment. Sediments represent the most extensive pollutants of surface water.

   Bottom sediments are important source of inorganic and organic matter in streams, fresh water, estuaries and
   oceans.
   Sediments are also repositories for trace metals such as Co, Cr, Cu, Mn, Mo, Ni, etc.

10. Infectious agents
    

    Wastewater discharged from municipalities; sanatoria, tanning etc. may contain decease producing
    micro-organisms.

11. Plant nutrients
    

    Growth stimulating plant nutrients include like nitrogen and phosphorous add to the BOD of the water.
    Presence
    of
    nutrients encourages algal growth, which decreases DO levels, and creates problems in treatments.

    1. Where does water pollution come from?

       The sources of water pollution are categorized as direct and indirect contaminant sources. Direct
       sources
       directly
       discharge contaminants into surface water which includes waste water from factories and sewage from
       housing
       colonies.
       Indirect sources include contaminants that enter the water supply from soil/groundwater systems and from
       the
       atmosphere
       via rain water. Soil and ground waters contain residue of agricultural practices (fertilizers,
       pesticides,
       etc.) and
       improperly disposed of industrial wastes. Atmospheric contaminants are also derived from human practices
       (such as
       gaseous emissions from automobiles, factories and even bakeries).

    2. How do we detect water pollution?

       Water is polluted by different contaminants and it can be detected by analyzing water samples in
       laboratory.
       Titration
       test is to detect hardness, dissolve oxygen, carbon dioxide and alkalinity. Colorimetric tests are
       performed
       to check
       PH, Phosphate, silica, ammonia and Sulfides. Heavy metal limit test is to determine the level of heavy
       metals.

    3. What is eutrophication? How it can be prevented?

       Increase in the concentration of phosphorus, nitrogen, and other plant nutrients in an aquatic ecosystem
       such as a lake
       is called eutrophication. This rise is nutrient level results in an accelerated life cycle of water plants
       like algae,
       water hyacinth, etc. Vegetative cover restricts entry of light and oxygen in the water. Moreover the
       degrading debris
       uses up all available dissolved oxygen in water rendering the water lifeless. Wastewater should be treated
       for removal
       of phosphorus and nitrates by various physiochemical and biological methods. Effective technologies are
       available in
       removal of nutrients along with BOD and COD. Conventional methods of separate nitrification and
       denitrification can also
       be adopted but with increased cost and area.

    4. Where does wastewater come from?

       Waste water comes from sewage which includes black water (human waste) and grey water (kitchen and laundry
       waste),
       septic tank discharge, industrial waste which includes effluent and process water. Agricultural practices
       also produce
       waste water by contaminating water with pesticides and fertilizers

    5. Why is it necessary to treat wastewater?

       Proper treatment of wastewater reduces health risks to humans, animals and prevents surface and
       groundwater
       contamination. Wastewater treatment helps to reuse the waste water and reduces the consumption of fresh
       water.

    6. What is a wastewater treatment system?

       Wastewater treatment is the process of removing contaminants from wastewater and household sewage, both
       runoffs
       (effluents), domestic, commercial and institutional. It includes physical, chemical, and biological
       processes to remove
       physical, chemical and biological contaminants. Its objective is to produce an environmentally safe
       fluid
       waste stream
       (or treated effluent) and a solid waste (or treated sludge) suitable for disposal or reuse (usually as
       farm fertilizer).

       Treatment system depends on the characteristics of wastewater and treated water quality to be achieved.
       The treatment
       plant includes primary treatment such as Screens, Grit Chambers & Clarifiers.

    7. What is aerobic wastewater treatment?

       Aerobic wastewater treatment is the process where bacteria requires oxygen for their respiration while
       oxidizing or
       consuming organic matter present in the wastewater. Aerobic bacteria can only convert organic compounds
       when plenty of
       oxygen is present, because they need it to perform any kind of chemical conversion. Usually the products
       they convert
       the contaminants to are carbon dioxide and water

    8. What is the MLSS and MLVSS?

       MLSS is Mixed Liquor Suspended Solids & MLVSS is Mixed Liquor Volatile Suspended Solids.
       MLSS is total suspende solids in the aeration tank whereas MLVSS is part of MLSS which actually
       concentration of
       biological matter present in aeration tank.

    9. What is F/M ratio?

       It is ration food to mass ratio ie BOD to the microorganism present in the aeration tank

    10. 12. What C:N:P means and what should be the ratio maintained?

        C– Carbon source which is food for biomass.– Either COD or BOD. Normally BOD is considered for the
        design
        purpose of
        aerobic treatment and COD concentration considered for anaerobic treatment.
        N – Nitrogen (TKN) which is Nutrients
        P — Phosphorus.
        Normally it is in the ratio of C:N:P i.e. 100: 5: 1 if BOD as Carbon source and 500:5:1 if COD as carbon
        source for
        calculation.

MBR – Membrane Bio Reactor

1. What Is MBR?

   The membrane bioreactor (MBR) is a combination of the activated sludge process and the membrane technology to
   provide an
   advanced level of organic and suspended solids removal.

2. What are the advantages of MBR system over conventional system?

   1. Compact System
   2. High effluent quality
   3. High volumetric load possible
   4. High rate of degradation
   5. Possible to convert from existing conventional active sludge purification
   6. Removes bacteria up to 6 log

3. Types of submerged/immersed MBR

   1. Flat Sheet
   2. Hollow fiber
   3. High volumetric load possible
   4. High rate of degradation
   5. Possible to convert from existing conventional active sludge purification
   6. Removes bacteria up to 6 log

4. What is INDION®IPC MBR?

   INDION IPC MBR membranes are flat “integrated permeate channel membrane” (IPC membrane) which comprises two
   membrane
   layers coated directly on opposite surfaces of a tridimensional textile (3D textile) that is used as support
   of the
   membrane layers. The 3D fabric consists of two parallel fabric layers which are spaced apart by loops of
   monofilament
   threads, thereby forming a permeate channel between the membrane layers.

5. What MLSS generally maintained in INDION®IPC MBR system?

   INDION®IPC MBR system have high MLSS compared conventional ASP and FMR system. INDION®IPC MBR system have
   MLSS
   8000-12000 mg/lit.

6. What are advantages of INDION®IPC MBR?

   1. Compact and modular Sewage Treatment Plant with in-built biological system and Ultra filtration system
      provide
      consistent treated water quality through membranes which will be free from bacteria & can be directly reused
      for
      gardening, car washing, cooling tower, building construction and all secondary purposes.
   2. Even in case of floating sludge a solid-free outlet quality can be guaranteed
   3. Operates at Higher MLSS (8000 – 12000 mg/lit) concentration in Aeration tank & higher sludge retention
      time hence
      low sludge generation results in reduction in cost for sludge handling system. Sludge generated is
      completely
      digested sludge.
   4. More efficient at High flux operation compared to other MBR technologies. Requires lower membrane surface
      area and
      plant footprint.
   5. Substantial reduction in energy consumption due to lower membrane area.
   6. State-of Art Low Fouling and fully back washable membrane helps to reduce cleaning chemical consumption
      and
      ensures long membrane life.
   7. Lower capital and operation cost of the plant
   8. Footprint can be reduced with available double & triple decker membrane arrangement.
   9. STP requires simple civil construction. Plant can be made functional or Upgraded in very short duration by
      installing prefabricated membrane modules.
   10. Fully Automated plant with user friendly Operation and minimal maintenance.
   11. Disinfection or more extensive tertiary treatment can be omitted. No need of additional tertiary treatment
       like
       chlorination, Sand filters, Activated Carbon filter or any filtration systems.

7. What are the features of INDION®IPC MBR?

   1. Integrated Permeate Channel membranes (IPC ®) the first fully back-washable flat sheet membrane
   2. Double flux yield compared to other MBR (40 LMH for sewage & 20 LMH for effluent)
   3. Lower footprint and energy demand

FMR – Fluidized Media Reactor

1. What is FMR?

   The Fluidized Media Reactor (FMR) system consists of an activated sludge aeration system where the bacteria
   is attached
   on carrier media. These carriers have an internal large surface for optimal contact water, air and bacteria.

2. Difference between FMR and MBBR?

   MBBR and FMR are same technology with different name.

3. What are the types of FMR media?

   1. PP Media

      1. High Protected Surface Area
      2. High physical & chemical resistance of media
      3. Low Annual Losses (3-5%)

   2. Carbon Impregnated Media

      1. Porous, adsorbing PU media impregnated with activated carbon
      2. High adsorbent capacity
      3. High internal porosity with extremely large surface area

4. What are advantages of FMR system?

   1. Reduced power and operating costs
   2. No continuous sludge recycle
   3. Significant reduction in space due to high surface area and loading of media
   4. Less maintenance
   5. Easy up gradation and extension of existing wastewater treatment plants

UASB – Up-flow Anaerobic Sludge Bed

1. What is anaerobic wastewater treatment?

   Anaerobic treatment is a biological process carried out in the absence of O2 for the stabilization of organic
   materials.
   The stabilization of organic material by conversion to methane, carbon dioxide, new biomass and inorganic
   products.
   Anaerobic treatment is most suitable for wastewaters with COD concentrations in the high strength range (>2000
   mg/l).

2. What are types of anaerobic technologies?

   1. Fixed Film reactor
   2. Fluidised Bed reactor
   3. Up flow Anaerobic Sludge Be d (INDION® UASB)

3. What is use of Three Phase separator in INDION® UASB ?

   Three Phase separator enables the reactor to separate gas, water and sludge mixtures.

4. What are the advantages of INDION® UASB compared to conventional UASB?

   1. Feed distribution boxes ensures even distribution of effluent at bottom of UASB.
   2. Less power consumption by gravity feeding system.
   3. Higher Life of internals – FRP fabricated from Iso-Phthalic Resin & all the pipes are in HDPE
   4. Gas Dome INDION® UASB gas dome is of FRP Iso-Phthalic Resin which is inert to this environment.
   5. Less replacement of internals with life of internals more than 12-15 years
   6. Inlet & outlet launders are open and hence can be Inspected, cleaned & maintained easily.
   7. Even inlet distribution system, uniform outlet collection system and provision for scum removal which
      increases
      the efficiency of UASB and consistent performance over long period of operation.
   8. Higher gas generation
   9. Outside Lamella clarifier , which gives better control on the settling of solids.

SBR – Sequential Batch Reactor

1. What is INDION® SBR?

   INDION® SBR is modification of conventional activated sludge process. In INDION® SBR, equalization,
   biological treatment
   and clarification of treated wastewater carried out in single tank with time control sequence.

2. What are the steps involved in INDION® SBR system?

   1. Fill :- The inlet valve opens and the tank is being filled in, while mixing is provided by means of blower
      (air)
   2. React (aeration):- Aeration of the mixed liquor is performed during the second stage by the use of
      mechanical
      aerators or transferring air into fine bubble diffusers fixed to the floor of the tank (diffused aeration
      system).
   3. Settle (sedimentation/ Clarification):- No aeration or mixing is provided in the third stage and the
      settling of
      suspended solids starts.
   4. Draw (decant):- During the fourth stage the outlet valve opens and the “clean” supernatant liquor exits
      the tank.

3. What are the advantages of INDION® SBR system?

   1. Flow rate fluctuations do not upset the plant as flow rate variation is limited to equalization tank only.
      In SBR,
      there is only level control of fixed volume.
   2. Operating flexibility and control – Better process control (MLSS, BOD loading and F/M ratio) as in batch
      process
      one can monitor and adjust the parameter very easily when compared with continuous process.
   3. Consistent good quality treated sewage for reuse application (BOD – <10, TSS – <20)
   4. Nitrification & Denitrification ,Primary clarification, biological treatment and secondary clarification
      can be
      achieved in a single reactor vessel.
   5. Elimination of clarifiers, sludge recirculation system.

4. Can SBR have more than one tank design?

   Yes, we can design SBR system with multiple SBR basin as per influent flow rate.

NGPSTP – New Generation Packaged Sewage Treatment Plant

1. What is NGPSTP?

   NGPSTP is New Generation Packaged Sewage treatment Plant which combines aeration and clarification in single
   unit.

2. Does NGPSTP handles Total Nitrogen?

   Yes. NGPSTP has anoxic zone which can convert nitrates to nitrogen gas by denitrification process.

3. Does NGPSTP require air blower?

   No. NGPSTP works on principle of rotating biological contactors.

4. Does NGPSTP have lower operating cost compare to other STP technologies?

   Yes. Air blower and pumps are not required in NGPSTP due to which it has lower OPEX compare to other aerobic
   technologies.

5. What are the features of NGPSTP?

   1. All in one single packaged STP
   2. Modular design
   3. High quality effluent
   4. 3 month sludge storage capacity
   5. Minimal maintenance
   6. GRP constriction – no corrosion

6. What are the advantages of NGPSTP?

   1. Minimal land requirement
   2. Lower OPEX (operating cost)
   3. Lower CAPEX (Capital cost)

Desalination

1. What is osmosis?

   Osmosis refers to the passage of water through a thin semipermeable membrane from the side with low salt
   concentration
   to the side with higher salt concentration. This can happen even when the water level is higher on the high
   salt side
   and the water must move against a pressure difference. The bottom line is that osmosis refers to a
   concentration
   difference manifesting itself as a pressure difference.

2. What is reverse osmosis (RO)?

   The other side of the coin is reverse osmosis. A difference in pressure is used to cause a difference in salt
   concentration. It is as though the pressure is being used to force the water molecules through the membrane
   while
   retaining the larger salt. Salt means any inorganic compound dissolved in water. When water is processed by
   reverse
   osmosis a large fraction of dissolved material is removed. The cleaner the input water the cleaner the output
   water will
   be. Conversely, if your input water is clean enough, you may not need an RO unit.

3. What are the alternatives to RO?

   1. Distillation- It produces clean water by evaporating the water from the input and condensing the steam. It
      is
      highly energy-intensive and expensive unless you have a free source of waste heat. Distillation systems tend
      to be
      low capacity.
   2. Ion-exchange- The systems work by exchanging cations such as calcium and magnesium for the cation on the
      resin,
      usually sodium, potassium or hydrogen. They also exchange anions like carbonate and sulfate for the anion on
      the
      resin, usually chloride or hydroxyl. These systems can be recharged and should be as the resins are very
      expensive.
      The recharging may be just a small annoyance (as with sodium chloride resins) or potentially hazardous (as
      with
      hydrogen/hydroxyl resins).

4. How do I know what is in my drinking water?

   If you are on city water, your local water must meet very strict Federal and State standards for purity.
   However, many
   areas use ground water (well water) high in minerals and salts. This can affect taste. All municipally treated
   water is
   chlorinated, and this can also affect taste and create odors in the water. If you are on a private well or
   spring, you
   should have your water tested. Contact AWS for specific recommendations.

5. Will RO remove hardness minerals or help cut down on scale build-up in coffee pots, etc.?

   Yes! Most water contains “total dissolved solids” (TDS), which is roughly the total inorganic mineral content
   of the
   water, and these are removed. The reverse osmosis membrane separates these dissolved solids, or salts and
   flushes them
   down the drain.

6. Will these systems remove lead?

   Yes. Both the RO membrane and the carbon block filter will reduce the lead. Carbon block filters use a
   lead-specific
   filter media combined with the carbon to reduce lead.

7. Will RO systems remove parasites or cysts?

   Yes. The RO systems are certified for cyst removal.

8. Are bacteria a problem with reverse osmosis systems?

   Yes and no. We have tested many of our systems for total bacteria counts over the years and have not found
   higher levels
   after the systems unless the systems sat for several days in between uses. However, in some cases, bacteria
   can grow,
   particularly when the source water is high in bacteria and/or low in chlorine residual. We also have
   Ultra-Violet
   Sterilizer Systems that disinfect water after it leaves the filter system, insuring water low in bacteria. The
   manufacturers state in their warranty information that the RO systems are designed to be installed on water
   that is
   disinfected or does not have dangerous bacteria such as e.coli.

9. Are RO systems difficult to install?

   No. The RO systems come complete with tubing, fittings and items required to install it. In some cases you
   may need to
   drill a new hole in your sink, or you can use an existing hole to install the RO faucet. Typically a plumber
   will take
   20 minutes to read the installation instructions and 1 to 1-1/2 hours to do a professional installation, but
   many
   homeowners have installed these themselves.

10. The filters should be changed once a year. The membrane should be changed every 3 to 5 years depending on
    the TDS levels in the purified water. How often should I change the filters in an RO system?

    The filters should be changed once a year. The membrane should be changed every 3 to 5 years depending on the
    TDS levels
    in the purified water.

11. What does mean by ‘Recovery’ of RO system?

    ‘Recovery’ of RO system is defined as ratio of Permeate Flow to the Feed Flow.
    % Recovery = Permeate Flow/Feed Flow X 100
    For e.g. : If feed Flow is 100 m3/hr and Permeate Flow is 60 m3/hr Then Recovery of RO
    System is 60 %.
    Recovery = 60 m3/hr/100 m3/hr X 100
    = 60 %.

12. What is meaning of ‘Salt Passage’?

    Theoretically no salt should pass through RO membrane. But no membrane is 100% perfect. Hence some salt does
    pass
    through imperfections on the membrane. Passage of this salt is called ‘Salt Passage’. % Salt Passage =
    Permeate TDS/Feed
    TDS X 100

13. What is meaning of ‘Salt rejection’?

    The percentage of Solute concentration removed from system feed water by the membrane is called ‘Salt
    rejection’. % Salt
    rejection = (1 – Salt Passage) X 100

14. What does it mean by ‘Permeate water’?

    Purified product water produced by membrane is called ‘Permeate water’ of RO system.

15. What is meaning of ‘Reject water’?

    Concentrated high TDS water is rejected by membrane is called ‘Reject water’ of RO system.

16. What does mean by ‘Flux’?

    The rate of Permeate water transported per unit membrane area is called ‘Flux’ of RO system.

17. What is MOC for RO membrane?

    Polyamide and Cellulose acetate are the MOC for RO membrane.

18. Does RO system require cleaning?

    Yes, RO system needs cleaning frequently, to remove scaling and fouling from the membrane surface, to improve
    system
    performance.

19. What factors affect RO performance?

    Pressure, temperature, recovery and feed water salt concentration are the factors which mainly influence the
    RO
    performance.

20. Can I use RO reject water for other applications?

    If RO reject TDS is 1000 ppm, we can use it for gardening purpose and toilet flushing purpose. RO reject
    water having
    TDS 1000 ppm to 2000 ppm can also be selectively used for plantation as some plants survive and grow on High
    TDS water.

21. Is pH correction required for RO system?

    In some process application where neutral pH (pH 7) is desired, pH correction is required for RO permeate
    water. pH of
    RO permeate water is slightly acidic in nature. It is around 5.5 to 6.4. Normally pH correction is carried out
    by
    caustic or Soda ash solution or by using degasser system. Degasser system removes CO2 (Carbon dioxide) from
    water and
    raise pH of water up to 7 (neutral pH).

22. What is feed water limiting condition for RO system?

    Following are the feed water limiting condition for RO system.

    1. Chlorine : Nil
    2. Suspended solids : < 1 ppm
    3. Turbidity : < 1 NTU
    4. SDI : < 4
    5. BOD and COD : Nil ( In some cases 10 ppm tolerable )
    6. Heavy metals : Nil
    7. Oil and grease : Nil
    8. pH (for cellulose acetate membrane) : 4 – 6 (for Polyamide membrane) : 3 – 11

23. Does chlorine affect RO membrane?

    Yes, if chlorine is present in RO feed water, it will oxidize RO membrane and will increase the pore size of
    RO
    membrane. It will deteriorate RO permeate water quality. Hence chlorine should be Nil in RO feed water.
    Activated carbon
    filter and SMBS dosing system are provided in pretreatment to prevent chlorine from entering RO membrane.

24. What is tolerable limit for iron for RO system?

    Iron in feed water should be less than 0.3 ppm for trouble free and safe operation of RO system. Fouling will
    take place
    on RO membrane and it will reduce RO permeate flow, if iron is more than 0.3 ppm.

25. What is the life of reverse osmosis membrane?

    RO membrane will last for at least 3 years with proper operation and maintenance of RO plant and with proper
    pretreatment system.

26. What is the difference between brackish water and sea water?

    The primary difference between brackish water and seawater is in the amount of dissolved salts/solids.
    Seawater contains
    higher amounts of dissolved solids ie from 10000 mg/l to over 40000 mg/l of total dissolved solids. Water that
    has < 10000 mg/l dissolved solids is considered to be Brackish. The greater the salt content of the water, the
    higher the pressure or electric power needed to treat water using membranes, resulting in higher energy
    costs.

DTRO – Disc Tube Reverse Osmosis

1. What is INDION® DTRO?

   Disc tube reverse osmosis (INDION® DTRO) technology has a distinct module structure than the spiral reverse
   osmosis
   technology. The feed flow enters the pressure vessel and reaches the disc in a short distance. With open flow
   channels,
   the feed flows 180 degrees over one side of the membrane and reverse flow to the other side, flowing on to the
   next
   disc. The reject and permeate flow down to the outlet. This flow reversal causes turbulence and an open
   channel flow
   path reduces the need for extensive pre-treatment.

2. What is difference between Conventional RO and INDION® DTRO?

   The Conventional RO system requires extensive pre treatment to meet stringent feed limiting condition like
   SDI < 3, turbidity <1 NTU, O&G – NIL. Hence UF system is must as pre-treatment to meet above SDI limits.
   Membrane replacement cost is comparatively higher as entire membrane needs to be replaced. Whereas, DTRO
   requires less pre treatment due to its unique assembly feature and can handle SDI upto15 to 20, turbidity
   <10, O&G up to 10 ppm. Hence only Sand Filtration is sufficient as Pre-treatment to DTRO system. It can
   handle higher fluctuations in feed quality. Membrane replacement cost is lower as individual membrane
   cushion can be replaced.

3. What are the limiting conditions for Feed BOD & COD in INDION® DTRO?

   There are no such feed limiting conditions for COD & BOD in INDION® DTRO

4. What are the types of cycles?

   1. Service Cycle – It is service cycle for filtration process
   2. Rinsing /Flushing Cycle – Flushing cycle with permeate water
   3. Cleaning in place (CIP) Cycle – Chemical cleaning in process cycle
   4. MGF backwash.

5. What are the basic important parameters for monitoring INDION® DTRO?

   Basic important parameters for monitoring are Conductivity, TSS, COD, pH, ORP, Total Hardness, Silica and
   Temperature

6. What are the advantages of INDION® DTRO over conventional RO system?

   Aspects of comparison	Spiral RO	Disc- Tube RO
   Pre-treatment	Extensive pre-treatment required	Less pre-treatment required
   Silt Density Index	SDI < 5	SDI  15 to 20
   Turbidity	< 1 NTU	< 10 NTU
   Oil & Grease	Nil	10 ppm
   Minimal pre-treatment for Suspended solids	UF	MGF
   Chemical Treatment	As per requirement	As per requirement
   Feed Quality Fluctuation	Unable to cope up with excess feed fluctuations.	Can handle fluctuations in feed quality
   Recovery	Depends on type of feed effluent and type of membrane.	Depends on type of feed effluent and type of membrane.
   BOD & COD	<30 ppm	No limiting conditions
   Membrane replacement cost	Entire membrane element need  to be replaced	Individual membrane cushions can be replaced.
   Average membrane life	3years	3years

AMBC- All Membrane Brine Concentrator

1. What is AMBC?

   The AMBC stands for All Membrane Brine Concentrator, it is advanced technology achieved brine concentration
   via
   osmotically assisted reverse osmosis based on combination of forward osmosis and reverse osmosis.

2. What are the advantages of AMBC system?

   1. Operates on high salinity waters that are beyond the reach of a conventional reverse osmosis process
   2. Low power consumption compared to other competing processes
   3. Simple operation and high reliability
   4. It utilises electrical power, eliminating the use of thermal energy and the complexities common to other
      brine
      concentration approaches; Could be incorporated into existing seawater RO facilities with zero or little
      impact on
      the existing operations
   5. It reduces the size of expensive, high maintenance and complex thermal brine concentrators and
      crystallisers in
      zero liquid discharge (ZLD) applications by significantly reducing the feed fluid volume.

3. 3. Is it possible to concentrate high salinity effluent upto TDS concentration of 140000 ppm by membrane
   based system?

   Yes we can concentrate high TDS effluent upto 140000 ppm with help of AMBC system.

4. Does AMBC require thermal energy?

   The AMBC process uses only electrical energy and does not require any thermal energy or vapour compression.

5. Does AMBC system require energy lesser than thermal brine concentrator?

   Yes. AMBC based system require fraction of energy compared to thermal energy brine concentrator.

6. What pretreatment required for AMBC?

   The pre-treatment requirements for AMBC are similar to that of a RO system. Impurities that can scale or foul
   the
   membranes are needed to be minimized prior to AMBC.

7. What operating pressure required in AMBC system?

   The operating pressures required in AMBC system are very much similar to that of seawater desalination RO
   systems i.e 60
   – 70 bar.

Waste to Energy

1. What is INDION® WASTE TO ENERGY SYSTEM?

   The INDION® Waste to Energy System design is a cost-effective treatment that takes a radically different
   approach using
   a novel combination of proven technology to manage the problems of sludge, organic waste /municipal solid
   waste.

2. What mean by Organic solid waste?

   Organic Solid waste means any segregated garbage or refuse from residential, industrial, or commercial areas
   etc.

3. What is sewage sludge?

   Sewage sludge is the sludge generated from Sewage treatment plants (STP) provided for community
   hotels/institute/universities.

4. How INDION® WASTE TO ENERGY SYSTEM minimizes disposal cost of sewage sludge?

   INDION® WASTE TO ENERGY SYSTEM is based on co digestion of organic solid waste and sewage sludge, which
   reduces the
   quantity of sludge.

5. What are the basic steps of INDION® WASTE TO ENERGY SYSTEM?

   1. Reception of Segregated Organic Solid Waste and STP sludge conditioning
   2. Mechanical pre-treatment- To Shred organic waste and homogenize it with thickened sewage sludge via
      macerator.
   3. Biogas handling system: Biogas generated from system shall be treated and converted to electrical power
      and heat.
   4. Digested sludge shall be dewatered and used as fertilizer/ manure. The heat from the biogas engine can
      also be
      used to dry the excess sludge to produce an organic fertilizer that meets the required hygienic standards
      for use in
      agriculture and landscaping.

6. What are major advantages of INDION® WASTE TO ENERGY SYSTEM?

   1. High Biogas Generation which can be used as Clean Energy source
   2. Generation of Organic Rich Fertilizer
   3. No disposal cost for Sewage sludge and Organic waste.